xiC - Technical Manual Version 1.16
3
Standard Conformity
The xiC cameras have been tested using the following equipment:
Model option –UB (microB USB 3.1 conector)
•
A shielded USB 3.0 cable ref. CBL-U3-3M0 (3m)
•
A shielded I/O Sync cable ref. CBL-702-8P-SYNC-5M0 (5m)
Model option – TC (Type C connector in USB 3.1 Gen 1 mode)
•
A shielded USB 3.1 Type-C to A cable (1m)
•
A shielded I/O Sync cable ref. CBL-702-8P-SYNC-5M0 (5m)
Model option –FV and – FL
•
Camera is connected to Tegra TX1 processor board via TX1CB-PHOXI-BRD and CBL-MQ-FL-0M1. Whole setup is housed
in AW16918ESS enclosure, with modified end panels to hold camera and provide access to power connector and Ethernet
connector. System is Linux operating system controlled over Ethernet from remote computer. For more information please
contact our support:
https://www.ximea.com/support/wiki/allprod/Contact_Support
Warning: Changes or modifications to the product or the environment may render it ineligible for operation under CE, FCC or
other jurisdictions. XIMEA recommends using the above configuration to ensure compliance with the following standards.
Please refer also to chapter
1.2.2.
CE Conformity
The xiC cameras described in this manual comply with following requirements. Please refer also to chapter
•
EC EMC Directive 2004/108/EEC
electromagnetic compatibility of equipment
Used harmonized European standards and technical specifications:
•
EN 55022:2006 + A2:2010
Information technology equipment – Radio disturbance characteristics – Limits and methods of measurement
•
EN 55024:2010
Information technology equipment - Immunity characteristics - Limits and methods of measurement
•
EN 61000-6-2:2005
Electromagnetic compatibility (EMC). Generic standards. Immunity for industrial environments
•
EN 61000-6-3:2007 + A1:2011
Generic standards – Emission standard for residential, commercial and light-industrial environments
•
EN 61000-4-2:2009
Electrostatic discharge immunity test
•
EN 61000-4-3:2006 + A2:2010
Radiated, radio-frequency electromagnetic field immunity test
•
EN 61000-4-4:2012
Electrical fast transient/burst immunity test
•
EN 61000-4-6:2009
Immunity to conducted disturbances, induced by radio frequency fields
•
EN 61000-6-1:2007
Generic standards – Immunity for residential, commercial and light-industrial environments
•
EN 61326-1:2013
Electrical equipment for measurement, control and laboratory use. EMC requirements. General requirements
•
EN 61000-4-8:2010
Electromagnetic compatibility (EMC). Testing and measurement techniques. Power frequency magnetic field immunity test
•
EN 55016-2-3:2010
Specification for radio disturbance and immunity measuring apparatus and methods. Methods of measurement of
disturbances and immunity. Radiated disturbance measurements
