xiC - Technical Manual Version 1.16
52
3.9.3.
Inserting / detaching FPC cable
When inserting or detaching cables increased caution need to be taken, to prevent connector or cable damage. MC cameras
interface connectors are equipped with locking mechanism. When locked pulling the cable may lead to damage of connector or
camera. When manipulating with cable the power supply for the camera must be turned off.
Cable have marked ends. It is important to connect the end marked “CAM” to the camera and end marked “BOB” to
host or adapter. Swapped orientation can cause damage to camera. It is important that the power is turned off when
inserting/detaching the cable.
figure 3-38, MC FPC cable laser marking
Inserting FPC cable MC option -FL
Open connector lock
Insert cable
Close connector lock
figure 3-39, MC FPC insert procedure option -FL
