MicroBlaze Micro Controller System v1.3
40
PG048 December 18, 2012
Chapter 6:
Customizing and Generating the Core
The GPO parameter tab showing the parameters with one of the four General Purpose
Output ports enabled is shown in
.
•
Use GPO
- Enable the General Purpose Output port.
•
Number of Bits
- Set the number of bits of the General Purpose Output port.
•
Initial Value of GPO
- Set the initial value of the General Purpose Output port. The
right most bit in the value is assigned to bit 0 of the port, the next right most to bit 1,
and so on.
X-Ref Target - Figure 6-5
Figure 6-5:
GPO Parameter Tab
