14
XTouch: Manual IP Address
You may also manually assign IP addresses from your XTouch control. To do so,
1.
Power On the device.
2.
Swipe up from the bottom of the screen and a menu will appear. Select the gear icon. This will enter
the device settings.
3.
Deselect ‘DHCP-enabled’.
4.
Type in the IP address, Subnet mask and Gateway, then click ‘Ok’ to save.
5.
In Xilica Designer, right click the device and select ‘Device Setup’.
6.
In the Network tab, the new IP address and setting will display. Click ‘Done’ to exit the window.
Summary of Contents for XTouch Series: XTouch50
Page 1: ...1 XTOUCH User Manual...
