Xilica Audio Design XD-4080, User Manual

Page: 9 / 21

9
Operating Channel menus
Channel linking
If the user presses one of the input or output Channel menu buttons, holds it down and presses any other
Channel menu button(s) in the input/output group, then the channels are linked together.
The green menu LEDs for the linked channels are lit.
Any modification of the data for the selected linked channel will be applied to the linked channels as well.
To cancel linking, just press any other
Channel menu key or the Exit key after releasing the held key.
Input microphone gain
(Only available for XD 4080M and XD 8080M models)
Input/output signal
LEVEL
The level (or gain) ranges from -40dB to +15dB in 0.25dB steps.
POL
The polarity (or phase) can be normal (+) or inverted (-)
DELAY
The maximum delay permitted is 62400 samples. Each sample is approximately 10us (1/96k). The equivalent
delay time is displayed to the right in parenthesis. The delay time unit can be set to ms, ft or m in the
System
menu. Please refer to Page 14.
LEVEL
The level (or gain) ranges from 0dB to +45dB in 3dB steps.
This level will only have an affect on the input channel when Mic input is selected from the system
menu. Please refer to Page 14.
IN_1: _______ MENU: Mic Gain
LEVEL: 0dB
IN_1: _______ MENU: Signal
LEVEL: 0.00dB
POL: +
DELAY: 0 (000.000ms)
XD Series: Channel menu