Xilica Audio Design XD-4080, User Manual

Page: 6 / 21

6
Power On/Off switch
Power input connector
Insert the supplied IEC plug connector into the socket. Connect the AC
end of the cord into a 90-240 VAC 50-60Hz power source.
Ethernet control
A standard RJ45 (Ethernet) connector for Ethernet control. The device
should be connected to a router/switch/hub via a straight through Cat5
cable.
AES/EBU connector
Digital I/O capability of 4x8 or 8x8 AES/EBU channels depending on XD
model, on a separate connector.
XD 8080 Analogue
inputs and outputs
Euro/Phoenix style terminal block output connections utilizing 3.5mm ter-
minal block connectors (included). Use balanced shielded audio cabling.
XD 8080 model has 8x8 inputs/outputs.
XD 4080 Analogue
inputs and outputs
Separate 3-pin connectors are provided for each audio input and output.
The device’s output stage employs the balanced impedance topology. All
I/O connectors have pin 1 as ground (shield), pin 2 as + and pin 3 as - .
XD Series: Hardware device