Xilica Audio Design XD-4080, User Manual

Page: 13 / 21

13
Output source
1-8
This sets the input channel source for the current output channel. It can be used to mix the input source (in
dB) or disable it (Off). If more than one input sources are enabled, they will be added together as the source
for the current output channel.
(5-8 available for XD8080 model only)
Output FIR crossover
TYPL
The only available filter type for low frequency crossover point (high pass) is FIR.
FRQL
Filter cut-off frequency of low frequency crossover point (high pass). Ranges from 20Hz to 30kHz in either
1Hz steps or 1/36 octave steps. The frequency steps and FIR Taps can be selected in the
System menu.
Please refer to page 14.
TYLH
The only available filter type for high frequency crossover point (low pass) is FIR.
FRQH
Filter cut-off frequency of high frequency crossover point (low pass). Ranges from 20Hz to 30kHz in either
1Hz steps or 1/36 octave steps. The frequency steps and FIR Taps can be selected in the
System menu.
Please refer to page 14.
OUT_1:________ MENU: Source
1: 0.00 4: Off 7: Off
2: Off 5: Off 8: Off
3:Off 6:Off
OUT _1: ________ MENU: XOvr FIR
TYPL: Off
TYPH: Off
FRQL: 1000Hz FRQH: 1000Hz
XD Series: Channel menu