VFO se�ng:
1. Momentarily press the [A/B / A>B]
bu�on to switch between VFO-A
and
VFO-B;
2. Set the required VFO frequency and
mode when on one VFO (A or B).
Split Opera�on (SPL)
1. Set the required receive frequency and mode on VFO-A first;
2. Then set the transmi�ng frequency and mode on VFO-B;
3.
Press the func�on bu�on
,
then the [AGC/SPL] bu�on to turn on the SPL (split)
func�on. The double-triangular icon will display between VFO-A and VFO-B
on the VFO area of the screen.
As well as using them for split mode VFOA/B can simply be used to set two
different simplex frequencies and modes so you can quickly switch between the
two in real time.
As of firmware version 1.73 with the AGC disabled, the receiver will have its RF
gain automatically set to 25% so that noise received is not significantly increased.
Automa�c Gain Control (AGC)
Select the appropriate AGC �me constant for the best receiving experience:
1. Momentarily press the AGC bu�on at the bo�om of the screen to cycle
through the three AGC selec�ons:
2. When the AGC-A mode is selected, the radio will automa�cally select the
appropriate AGC control parameter depending upon the current mode.
VFO Opera�on
Split Frequency Opera�on
AGC-S → AGC-F → AGC-A → AGC--
AGC-S
AGC-F
AGCA
AGC
Slow AGC control
Fast AGC control
Automa�c AGC control
AGC OFF
See below
Recommended
se�ngs
AM mode: AGC-S
CW AGC-F
SSB: AGC-S
VISIT RADIODDITY.COM FOR DOWNLOADS AND HELP
22
