Selec�on of Working Frequency Range
As well as the amateur bands shown, SW broadcast bands can be added in
the sequence through system menu op�on 8 “Band Stacking”. This allows
quicker selec�on of the broadcast bands to listen to them. Transmission mode
is only available on the Amateur bands.
The 60m frequency range set is 5.330.5-5.405MHz and includes the the ITU
WRC15 band of 5351.5 kHz to 5366.5 kHz plus the US channel frequencies.
Should you require other channels or bandlets for example for opera�on in
the UK, please contact your dealer so that he can program these in the unit
for you.
Opera�on above the maximum voltage given in the specifica�ons will
seriously damage the radio!
The displayed voltage may vary ±0.3V from the actual value.
The G90/S is uniquely designed such that lower voltages do not result in
significantly reduced TX power or RX performance.
The G90/S receives 0.5~30MHz but is set to only transmit on the amateur
radio bands. The amateur bands are divided into 10 frequency blocks.
[MODE]
[BAND]
Frequency band decrease
Frequency band increase
Opera�on methods:
Pressing the [<] or [>] BAND bu�ons will cycle through these bands.
3
.5MHz
7
.0MHz
10MHz
14MHz
18MHz
21MHz
24MHz
1.
8
MHz
28MHz
5.
3
MHz
VISIT RADIODDITY.COM FOR DOWNLOADS AND HELP
16
