background image

Warranty

Conditions, are not included in warranty:

1. A warranty period has expired;

2. Absence of sales receipt or it correction;

3. Damage, arising under force majeure circumstances;

4. Completion of maintenance, fall, neglect, abuse, water impact, accident, damaged label 

and marking device;

5. Device model, specified in the warranty card, does not match real goods;

6. Performing maintenance device, that does not meet  guidelines, specified in 

instructions;

7. Emergence of unusual sound and vibration of pedals, rear bushings, steering systems, 

shock absorber, flywheel and other parts;

8. Deformation of wheels as a result of a heavy blow; damage to parts, caused by external 

factors or drop the bike; lowering the wheel as a result of a sharp object punctured; 

damage to individual components due to delayed replacement parts; damage or scratches 

on a saddle; frame damage as a result of installing a saddle above the specified limit 

height;

9. An emergence of  flaking varnish, appearance of corrosion on a frame and other details of 

the bike due to moisture, shock, friction or other external factors; natural shedding varnish or 

fading of colors on metal and plastic parts after prolonged use of the vehicle;

10. Damage to the bicycle and its functions, as a result of its use to perform tricks, lowering 

the stairs, jumps and other similar actions;

11. Fracture or deformation of a frame as a result of excessive and improper use of a 

bicycle;

12. Built-in sensors are not subject to multiple charging. A warranty terms not apply to a dry 

battery, push-button type battery. When battery is spent, its replacement is performed by 

user and one`s costs.

Summary of Contents for QiCycle EF1









Reviews: