PZ-TIO Manual
Version 1.01
© 2022 XIA LLC
16
with a standard Ethernet cable (no crossover cable required). However, a number of
configurations have to be set manually:
1.
On the PZ-TIO terminal, type
ifconfig eth1 up 192.168.1.86
to bring up
the Ethernet connection and assign the IP number. In some cases, eth0 or eth2 has to
be used instead of eth1.
2.
On the Windows PC (here Windows 7), go to Start > Control Panel > Network and
Sharing Center > Change Adapter Settings > Local Area Connection
In the Local Area Connection “Properties” dialog, select “Internet Protocol Version 4
(TCP/IPv4)” and click “Properties”.
In the properties dialog, set IP address, subnet mask, and gateway as shown above.
(The gateway is equal to PZ-TIO’s IP address.)
Note: The network will not be able to connect to the internet. The date/time of the PZ-TIO
will likely be initialized to 1970.
