manualshive.com logo in svg

xFusion Digital Technologies FusionServer G8600 V7, Manual

Share
Download
xFusion Digital Technologies FusionServer G8600 V7 Manual Download Page 81

8

 Safety Instructions

8.1 Security

8.2 Maintenance and Warranty

8.1 Security

General Statement

●

Comply with local laws and regulations when operating devices. These safety
instructions are only a supplement.

●

The "DANGER", "WARNING", and "CAUTION" information in this document
does not represent all the safety instructions, but supplements to the safety
instructions.

●

Observe all safety instructions provided on the device labels when installing
hardware. Follow them in conjunction with these Safety Instructions.

●

Operators of special types of work (such as electricians and operators of
forklifts) must be certified or authorized by the local government or authority.

WARNING

In a household scenario, operation of this device may cause wireless interference.

Personal Safety

●

This device is not suitable for use in places where children may be present.

●

Only certified or authorized personnel are allowed to install device.

●

Discontinue any dangerous operations and take protective measures. Report
anything that could cause personal injury or device damage to a project
supervisor.

●

Do not move devices or install cabinets and power cables in hazardous weather
conditions.

FusionServer G8600 V7 Server
Technical White Paper

8 Safety Instructions

Issue 03 (2023-09-15)

Copyright © xFusion Digital Technologies Co., Ltd.

74

Summary of Contents for FusionServer G8600 V7

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands