Identifier
Indicators
and Buttons
State Description
Health status
indicator
● Off: The device is powered off or faulty.
● Blinking red at 1 Hz: A major alarm has been
generated on the system.
● Blinking red at 5 Hz: A critical alarm has been
generated on the system.
● Steady green: The device is operating
properly.
FlexIO card
presence
indicator
Indicates whether the FlexIO card is detected.
● Off: The OCP 3.0 network adapter is not in
position.
● Blinking green at 0.5 Hz: The OCP 3.0
network adapter is in position but is not
powered on.
● Blinking green at 2 Hz: The OCP 3.0 network
adapter is in position and has just been
inserted.
● Steady green: The OCP 3.0 network adapter
is in position, and the power supply is normal.
Power button/
indicator
Power indicator:
● Off: The device is powered off.
● Steady green: The device is powered on.
● Blinking yellow: The iBMC is starting. The
power button is locked and cannot be
pressed. The iBMC is started in about 1
minute, and then the power indicator is
steady yellow.
● Steady yellow: The device is in the standby
state.
Power button:
● When the device is powered on, you can
press this button to gracefully shut down the
OS.
NOTE
For different OSs, you may need to shut down the
OS as prompted.
● When the device is powered on, you can hold
down this button for 6 seconds to forcibly
power off the device.
● When the power indicator is steady yellow,
you can press this button to power on the
server node.
FusionServer G8600 V7 Server
Technical White Paper
5 Hardware Description
Issue 03 (2023-09-15)
Copyright © xFusion Digital Technologies Co., Ltd.
12
