xFusion Digital Technologies FusionServer G8600 V7 Manual Download Page 25

Page: 25 / 112

NO TE

● The rear panel supports four PCIe riser modules. Each module supports two NVMe

SSDs and three PCIe 5.0 x16 standard cards.

● The standard configuration supports one OCP NIC. For details about the OCP 3.0

NICs, see

5.6.1 OCP 3.0 NIC

The figure is for reference only. The actual configuration may vary.

●

High-performance configuration

Figure 5-5

Rear view

Rear fan modules (used
for heat dissipation of the
GPU modules)

I/O module 4

I/O module 3

12 V PSUs (for the
system enclosure)

BMC card

Riser module 2 in the
composite enclosure

Riser module 1 in the
composite enclosure

I/O module 1

I/O module 2

Note: The high-performance riser module of the composite enclosure is for
reference only. The actual configuration may vary.

FusionServer G8600 V7 Server
Technical White Paper

5 Hardware Description

Issue 03 (2023-09-15)

Summary of Contents for FusionServer G8600 V7

















































































































Search results

Summary of Contents for FusionServer G8600 V7

Reviews:

Brands by name

Popular brands

xFusion Digital Technologies FusionServer G8600 V7, Manual

Search results

Summary of Contents for FusionServer G8600 V7

Reviews:

Brands by name

Popular brands