xFusion Digital Technologies FusionServer G8600 V7 Manual Download Page 34

Page: 34 / 112

No.

Description

Example

Temperature class

● XT (Extended Temperature

Grade): 0ºC to 95ºC (32ºF to
203ºF)

● NT (Normal Temperature

grade): 0ºC to 85ºC (32ºF to
185ºF)

5.4.1.2 Memory Subsystem Architecture

The server provides 32 memory interfaces. Each processor integrates eight memory
channels.

Install the memory modules in the primary memory channels first. If the primary
memory channel is not populated, the memory modules in secondary memory
channel cannot be used.

Table 5-5

Memory channels

CPU

Channel

DIMM

CPU 1

A (primary)

DIMM000(A)

DIMM001(I)

B (primary)

DIMM010(B)

DIMM011(J)

C (primary)

DIMM020(C)

DIMM021(K)

D (primary)

DIMM030(D)

DIMM031(L)

E (primary)

DIMM040(E)

DIMM041(M)

F (primary)

DIMM050(F)

DIMM051(N)

G (primary)

DIMM060(G)

DIMM061(O)

H (primary)

DIMM070(H)

DIMM071(P)

CPU 2

A (primary)

DIMM100(A)

FusionServer G8600 V7 Server
Technical White Paper

5 Hardware Description

Issue 03 (2023-09-15)

Summary of Contents for FusionServer G8600 V7

















































































































Search results

Summary of Contents for FusionServer G8600 V7

Reviews:

Brands by name

Popular brands

xFusion Digital Technologies FusionServer G8600 V7, Manual

Search results

Summary of Contents for FusionServer G8600 V7

Reviews:

Brands by name

Popular brands