xFusion Digital Technologies FusionServer G8600 V7 Manual Download Page 47

Page: 47 / 112

Active Indicator
(Green)

Fault Indicator
(Red/Blue)

State Description

Off

Blinking red at 0.5
Hz

The NVMe drive has completed the hot
swap process and is removable.

Off

Blinking red at 2
Hz

The NVMe drive is being hot-swapped.

Steady on/off

Red steady on

The NVMe drive is faulty.

5.5.3 RAID Controller Card

The RAID controller card supports RAID configuration, RAID level migration, and
drive roaming.

●

For details about the optional components, consult your local sales
representative or see "OS and Parts Compatibility" in the

Compatibility

Checker

●

For details about the RAID controller card, see the

V7 Server RAID Controller

Card User Guide

5.6 Network

5.6.1 OCP 3.0 NIC

OCP 3.0 NICs provide network expansion capabilities.

●

The FlexIO slot supports an OCP 3.0 NIC, which can be configured as required.

●

For details about the optional components, consult your local sales
representative or see "OS and Parts Compatibility" in the

Compatibility

Checker

●

For details about OCP 3.0 NICs, see the documents of each OCP 3.0 NIC.

5.7 I/O Expansion

5.7.1 PCIe Card

PCIe cards provide ease of expandability and connection.

●

The balanced configuration supports up to 12 PCIe 5.0 x16 standard expansion
slots.

●

The high-performance configuration supports up to nine PCIe 5.0 x16 standard
expansion slots.

●

For details about the optional components, consult your local sales
representative or see "OS and Parts Compatibility" in the

Compatibility

Checker

FusionServer G8600 V7 Server
Technical White Paper

5 Hardware Description

Issue 03 (2023-09-15)

Summary of Contents for FusionServer G8600 V7

















































































































Search results

Summary of Contents for FusionServer G8600 V7

Reviews:

Brands by name

Popular brands

xFusion Digital Technologies FusionServer G8600 V7, Manual

Search results

Summary of Contents for FusionServer G8600 V7

Reviews:

Brands by name

Popular brands