Configuratio
n
Front Drive
Rear Drive
Built-in Drive
Drive
Management
Mode
8 x 2.5" drive
pass-through
configuration
2
● Front drive
(8 x 2.5"):
– Slots 0
to 7
support
only
SAS/
SATA
drives.
-
-
● 1 x PCIe
plug-in
RAID
controller
card
a
● a: The PCIe plug-in RAID controller card is installed in slot 4 by default.
● For details about the optional components, consult the local sales
representative or see "OS and Parts Compatibility" in the
.
Drive Numbering
NO TICE
The drive numbers identified by the RAID controller card vary depending on the
cabling of the RAID controller card. This section uses the drive numbers identified by
a RAID controller card that adopts the default cabling described in "Internal Cabling"
in the
FusionServer 2488H V7 Server Maintenance and Service Guide
.
●
Drive numbering of the 8 x 2.5" drive pass-through configuration 1 in
Figure 5-18
Drive numbering
Table 5-8
Drive numbering
Drive No.
Drive Number Displayed on the
iBMC WebUI
0
0
1
1
2
2
FusionServer 2488H V7 Server
Technical White Paper
5 Hardware Description
Issue 01 (2023-09-01)
Copyright © xFusion Digital Technologies Co., Ltd.
30
