OMNIHI5
USER MANUAL
15
MNL-0022
5.1.2 Power on
Before using the device, please use water to clean and wet the skin area where
electrodes will be attached. Hold the power button for 1 second and you will see the
following interface. It will go to the default NMES mode in 3 seconds. Press the mode
button to switch and select among NMES, ETS, PAS, EMG and GAME mode.
5.1.3 Mode Selection
5.1.3.1 NMES
Press the Play/Pause button to start the treatment and press
“+” or “-” to adjust the
intensity.
5.1.3.2 ETS
Press the Play/Pause button to start the treatment, and press
“+” or “-” to adjust the
intensity. The stimulation will be triggered when user contracts the muscle and the
EMG signal reaches the threshold.
5.1.3.3 PAS
Press the Play/Pause button to start the treatment, and press
“+” or “-” to adjust the
intensity. The stimulation will be triggered when user contracts the muscle.
