manualshive.com logo in svg

XFit ATLAS, User Manual, Page: 3 / 28

Share
Download
XFit ATLAS User Manual Download Page 3

2 

TABLE OF CONTENTS 

 

IMPORTANT SAFETY INSTRUCTIONS -------------------------------------------  3 
PARTS LIST -------------------------------------------------------------------------------  5 
ASSEMBLY COMPONENTS ----------------------------------------------------------  7 
TOOL ----------------------------------------------------------------------------------------  6 
EXPLODED VIEW ------------------------------------------------------------------------ 8 
ASSEMBLY INSTRUCTIONS ---------------------------------------------------------  8 
STORAGE ---------------------------------------------------------------------------------- 13 
MOVING THE TREADMILL ------------------------------------------------------------ 14 
OPERATING THE COMPUTER ------------------------------------------------------  15 
EMERGENCY STOP --------------------------------------------------------------------  17 
BELT ADJUSTMENT --------------------------------------------------------------------  18 
LUBRICATION ----------------------------------------------------------------------------- 19 
INCLINE ADJUSTMENT ---------------------------------------------------------------- 19 
CARE, MAINTENANCE & TROUBLESHOOTING GUIDE --------------------  20 
WARM UP AND COOL DOWN ROUTINE ----------------------------------------- 22 

Summary of Contents for ATLAS





























Reviews:

No comments