XFit ATLAS, User Manual, Page: 18 / 28

17
SAFETY TETHER KEY
MODE: Press the MODE button on the Left Handrail to select each function (TIME,
DISTANCE, CALORIES, or PULSE) for set up a workout goal value.
ON/OFF:
Press the ON/OFF button Located on the Left Handrail to start or stop the
treadmill.
SPEED
﹢
: Press the SPEED
﹢
button on the Right Handrail to increase speed.
SPEED
﹣
: Press the SPEED
﹣
button on the Right Handrail to decrease speed.
EMERGENCY STOP
Before beginning a workout session ensure that the Safety Tether Key is properly placed
onto the Computer Console and the Safety Clip is securely attached to an article of your
clothing. If you fall the clip will pull out the
SAFETY TETHER KEY
from the Computer
Console and the running belt will stop immediately for emergency stop, helping to prevent
injury.
Replaced the Safety Tether Key onto the Computer Console. Press the START/STOP
button to begin exercise again.
IMPORTANT:
The SAFETY KEY has a magnet which is connected to the console. At the other end there
is a clip that must be placed on your clothes. The treadmill only works with the safety key on the console.
MODE
ON/OFF
SPEED
﹢
SPEED
﹣