XFit ATLAS, User Manual, Page: 20 / 28

19
Lubricant
1 PC
LUBRICATION
Lubricating under the running belt will ensure superior performance and extend its life
expectancy. After the first 25 hours of use (or 2-3 months) apply some lubricant, and
repeat for every following 50 hours of use (or 5-8 months).
How to check running belt for proper lubrication
Lift one side of the running belt and feel the top surface of the running deck.
If the surface is slick to the touch, then no further lubrication is required.
If the surface is dry to the touch, apply some lubricant.
How to apply lubricant
Lift one side of running belt.
Pour some lubricant under the
centre
of the running belt on the top surface of the
running
deck .
Run on the treadmill at a slow speed for 3 to 5 minutes to evenly distribute lubricant.
NOTE: DO NOT over lubricate running deck. Any excess lubricant that comes out should
be wiped off.
WARNING: The contact between the wooden surface of the treadmill and the treadmill plays an important role
in the operation and life of the treadmill. We recommend that you keep the treadmill clean and lubricate it
frequently, following the instructions for use. Incomplete lubrication causes damage to the belt and electrical
parts of the treadmill.
INCLINE ADJUSTMENT
Place one hand on the rear end of main frame. Lift the main frame up then adjust the
Incline Adjuster to the desired position.