Windows 98 and Windows Me
WorkCentre® C2424 Copier-Printer
6-29
Printing the Configuration Page
You can print the “Configuration Page” to help you solve printing problems and obtain the best
results from your system. To print the “Configuration Page”:
1.
On the control panel, press the
System Setup
button.
2.
Select
Information
, then press the
Enter
button.
3.
Select
Information Pages
, then press the
Enter
button.
4.
Select
Configuration Page
, then press the
Enter
button to print.
Note
Print the Menu Map to see other information pages available for printing.
Verifying Settings
1.
Right-click
Network Neighborhood
on the desktop, then click
Properties
.
2.
Click the
Configuration
tab. A list of installed network components appears for the
following items:
■
Client for Microsoft networks
■
Xerox TCP/IP Port Monitor
3.
If you are running CentreWare DP verify the following:
■
Novell Networks: You are required to load Novell IntraNetWare Client or Microsoft
Client for IPX networks.
■
TCP/IP Networks: No additional software is required, but your system must have a
valid TCP/IP address assigned.
4.
If any of the above protocols or services are not installed, install the necessary components
and restart the system. When the system is restarted, return to this document.
5.
Click
Start
, click
Settings
, then click
Printers
. The
Printers
window appears.
6.
Right-click the printer icon, then click
Properties
.
7.
Select the
Details
tab.
8.
Verify the following:
a.
The device driver name in the
Print Using the Following Driver
list. If necessary, re-
select or install a new device driver.
b.
The
Port
name in the
Print to the Following Port
list. If necessary, re-select the
correct name.
9.
Send a print job to the system. If the system does not print, access
PhaserSMART
Technical Support from the
Troubleshooting
tab of the Windows device driver or go to
www.xerox.com/office/support
.
