Windows NT 4.x
WorkCentre® C2424 Copier-Printer
6-21
Other Methods of Installation
Install your system on a Windows NT network using the Microsoft TCP/IP Protocol.
The following methods can also be used to monitor or configure your system:
■
A web browser using CentreWare IS if your system is connected to a Windows NT
network with TCP/IP protocol enabled.
■
The Xerox CentreWare MC snap-in to Microsoft Management Console for installing or
managing multiple systems on a Windows NT network with TCP/IP protocol enabled. See
the
CentreWare MC User Guide
at
www.xerox.com/office/pmtools
.
Note
The CentreWare methods are not discussed in this section. For more information about
CentreWare IS or CentreWare MC, see "Device Management Software" on page 6-9.
Quick Install Steps (Microsoft TCP/IP Protocol)
Note
This procedure is only performed by the system administrator.
1.
Right-click the
My Network Places
icon on the desktop, then click
Properties
.
2.
Click the
Protocols
tab to verify that the TCP/IP protocol has been installed.
3.
Select the
Services
tab and verify that Microsoft TCP/IP Printing software is installed. If it
is not installed, install it, and then return to this document.
Adding the System
1.
Open the
Control Panel
, then
double-click the
Printers
icon.
2.
Double-click
Add Printer
to launch the
Add Printer Wizard
, then click
Next
.
3.
Verify that
My Computer
is selected, then click
Next
.
4.
Click
Add Port
, then select the LPR Port
from the list displayed.
5.
Click
New Port
.
6.
Enter the IP address of the system, and a name of 31 characters or less (no spaces).
7.
Select
OK
.
8.
Verify that the new IP address you entered is listed correctly. If the check box next to the
IP address is not checked, select the check box, then click
Next
.
Configuring the System
1.
Insert the
WorkCentre C2424 Software CD-ROM
into the computer’s CD-ROM drive, then
click
Have Disk
.
2.
Click the
Browse
button and select the directory containing the Windows NT drivers.
3.
Select the
*.INF
file, then click
Open
. Verify that the path and filename are correct, then
click
OK
.
4.
Select the correct system, then click
OK
.
5.
Enter a name for the system, select whether you want that device to be the default, then
click
OK
.
