Windows NT 4.x
WorkCentre® C2424 Copier-Printer
6-22
6.
Select one of these options:
■
If the system is not shared, click
Next
.
■
If the system is shared, enter a Share Name, check the
Share
box, then click
Next
.
Printing a Test Page
You are prompted to print a test page.
1.
Select one of these options:
■
Click
Yes
to print a test page, then click
Next
.
■
Click
No
if you do not want to print a test page, then click
Next
.
2.
Select one of these options:
■
Click the
Finish
button if the data presented is correct. Proceed to step 3.
■
Click the
Back
button to correct the data if incorrect, then click
Finish
when the data
is correct. Proceed to Step 3.
3.
If you printed a test page, you are prompted to confirm that the test page printed:
■
Click
Yes
if the test page printed successfully.
■
Click
No
if the test page did not print or printed incorrectly. Proceed to step 4.
4.
Note the print-quality of the print job. If print-quality problems exist or if the job does not
print, see the Troubleshooting section of this guide.
Windows NT 4.x Troubleshooting (TCP/IP)
This troubleshooting section assumes you have completed the following tasks:
■
Loaded a PCL or PostScript device driver.
■
Printed and kept a current copy of the “Configuration Page”.
Printing the Configuration Page
You can print the “Configuration Page” to help you solve printing problems and obtain the best
results from your system. To print the “Configuration Page”:
1.
On the control panel, press the
System Setup
button.
2.
Select
Information
, then press the
Enter
button.
3.
Select
Information Pages
, then press the
Enter
button.
4.
Select
Configuration Page
, then press the
Enter
button to print.
Note
Print the Menu Map to see other information pages available for printing.
