Xerox WorkCentre 7970 System Administrator Manual Download Page 77

Page: 77 / 268

Security

Xerox

WorkCentre

7970 Multifunction Printer

System Administrator Guide

Setting Up Authentication for a Smart Card System

Domain Controller

On the Login Methods page, next to Domain Controllers, click

Edit

. The domain controller server

must validate the domain certificate on the smart card of the user before the user can access the

printer.

Click

Add Domain Controller

If you are using a Windows-based domain controller, under Domain Controller Type, select

Windows-Based Domain Controller

Type the domain controller server address information.

Click

Save

to apply the new settings or

Cancel

to return to the previous screen.

To change the search priority of the domain controller, click

Change Domain Priority

To change the priority of the server, select a server in the list and click the arrows.

Click

Close

To configure NTP settings, next to Network Time Protocol, click

Edit

. Synchronize the domain

controller time with the time set on the printer.

Note:

Xerox recommends that you enable NTP to ensure time synchronization.

To return to the Login Methods page, click

Close

To associate an LDAP server with your Domain Controller for authorization or personalization, under

LDAP Server Mapping, click

Add LDAP Mapping

Configuring OCSP Validation Server Settings

If you have an OCSP server, or an OCSP certificate validation service, you can configure the printer to

validate certificates installed on the domain controller.

Before you begin:

Add a domain controller.
1.

On the Login Methods page, next to Certificate Validation, click

Edit

Select a validation method and click

Next

On the Required Settings page, type the URL of the OCSP server.

To ensure that the printer can communicate with the OCSP server and the domain controller,

configure your proxy server settings as needed.

For each domain controller listed, under Domain Controller Certificate, select the corresponding

domain controller certificate from the menu. If there are no certificates installed, click

Install

Missing Certificate

Click

Save

Setting the Inactive Time Limit

On the Login Methods page, next to Smart Card Inactivity Timer, click

Edit

Specify the maximum amount of time before a user is logged out automatically. Type the time in

minutes.

Click

Save

Summary of Contents for WorkCentre 7970













































































































































































































































































Search results

Summary of Contents for WorkCentre 7970

Reviews:

Related manuals for WorkCentre 7970

Brands by name

Popular brands

Xerox WorkCentre 7970, System Administrator Manual

Search results

Summary of Contents for WorkCentre 7970

Reviews:

Related manuals for WorkCentre 7970

Brands by name

Popular brands