Security
74
WorkCentre 7800 Series Multifunction Printer
System Administrator Guide
Configuring Smart Card Authentication Settings
When Smart Card authentication is configured, users swipe a pre-programmed identification card at the
control panel. Purchase and install a Smart Card reading system before configuring Smart Card
authentication.
To configure access rights using Smart Card authentication:
•
Provide information about your domain controller servers and configure Domain Controller and NTP
settings.
•
Set the login method to
Smart Cards
. For details, see
Setting the Login Method
on page 67.
•
If you want to validate certificates, configure Certificate Validation options and provide
information about your OCSP server.
•
If needed, configure Smart Card Inactivity Timer settings.
•
If needed, specify the method the printer uses to acquire the email address of a user by configuring
email Smart Card Policies.
•
If you want a custom image to appear at the control panel, import your image.
•
If you enabled Personalization, configure LDAP server settings.
•
Configure authorization settings. For details, see
Authorization
on page 77.
The Login Methods page in CentreWare Internet Services provides links to authentication and
personalization configuration settings.
1.
In CentreWare Internet Services, click
Properties
>
Login/Permissions/Accounting
.
2.
Click
Login Methods
.
Setting Up Authentication for a Smart Card System
Domain Controller
1.
On the Login Methods page, next to Domain Controllers, click
Edit
. The domain controller server
must validate the domain certificate on the smart card of the user before the user can access the
printer.
2.
Click
Add Domain Controller
.
3.
If you are using a Windows-based domain controller, under Domain Controller Type, select
Windows-Based Domain Controller
.
4.
Type the domain controller server address information.
5.
Click
Save
to apply the new settings or
Cancel
to return to the previous screen.
6.
To change the search priority of the domain controller, click
Change Domain Priority
.
a.
To change the priority of the server, select a server in the list and click the arrows.
b.
Click
Close
.
7.
To configure NTP settings, next to Network Time Protocol, click
Edit
. Synchronize the domain
controller time with the time set on the printer.
Note:
Xerox recommends that you enable NTP to ensure time synchronization.
8.
To return to the Login Methods page, click
Close
.
To associate an LDAP server with your Domain Controller for authorization or personalization, under
LDAP Server Mapping, click
Add LDAP Mapping
.
