Installation and Setup
46
WorkCentre 7220/7225 Multifunction Printer
User Guide
9.
From the list of discovered printers, select your printer, then click
Next
.
If your printer does not appear in the list of discovered printers:
a.
Click the
Network Printer Icon
.
b.
Type the IP address of your printer, then click
Continue
.
c.
Select your printer in the list of discovered printers, then click
Continue
.
10.
To accept the print queue message, click
OK
.
11.
Select or clear the
Set Printer as Default
and
Print a Test Page
check boxes.
12.
Click
Continue
, then click
Close
.
Note:
The printer is automatically added to the printer queue in Macintosh OS X version 10.5 and
later.
To verify the installation of printer options with the print driver:
1.
From the Apple menu, click
System Preferences
>
.
2.
Select the printer in the list, then click
Options and Supplies
.
3.
Click
Driver
, then confirm that your printer is selected.
4.
Confirm that all of the options installed on the printer appear correct.
5.
If you change settings, click
Apply Changes
, close the window, and quit System Preferences.
Installing Drivers and Utilities for UNIX and Linux
Xerox
®
Services for UNIX Systems is a two part installation process. It requires the installation of a
Xerox
®
Services for UNIX Systems code package and a printer support package. The Xerox
®
Services for
UNIX Systems code package must be installed before installing the printer support package.
Note:
You must have root or superuser privileges to perform the UNIX print driver installation on
your computer.
1.
At the printer, do the following:
a.
Verify that both the TCP/IP protocol and the proper connector are enabled.
b.
On the printer control panel, do one of the following for the IP address:
•
Allow the printer to set up a DHCP address.
•
Enter the IP address manually.
c.
Print the Configuration Report and keep it for reference. For details, see
Configuration Report
on page 29.
2.
At your computer, do the following:
a.
Go to
www.xerox.com/office/WC7220_WC7225drivers
and select your printer model.
b.
From the Operating System menu, select
UNIX
, then click
Go
.
c.
Select the
Xerox
®
Services for UNIX Systems
package for the correct operating system. This
package is the core package and must be installed before the printer support package.
d.
To begin downloading, click the
Start
button.
e.
Repeat steps a and b, then click the printer package for use with the Xerox
®
Services for UNIX
Systems package that you selected earlier. The second part of the driver package is ready for
download.
