Maintenance
Xerox
®
WorkCentre
®
6025 Multifunction Printer 131
User Guide
Adjustments and Maintenance Procedures
This section includes:
•
Color Registration .............................................................................................................................................................. 131
•
Adjusting Paper Type ....................................................................................................................................................... 132
•
Adjusting the Bias Transfer Roller ............................................................................................................................... 132
•
Adjusting the Fuser ........................................................................................................................................................... 133
•
Refreshing the Bias Transfer Roller ............................................................................................................................ 133
•
Adjusting the Altitude ...................................................................................................................................................... 133
Color Registration
The printer automatically adjusts the color registration when automatic adjustment is turned on. You
can also adjust color registration manually any time the printer is idle. You must adjust the color
registration any time the printer is moved. If you are having printing problems, adjust the color
registration.
Setting Automatic Color Registration
1.
On the printer control panel, press the
System
button.
2.
To select
Admin Menu
, press the arrow buttons, then press
OK
.
3.
Select
Maintenance
, then press
OK
.
4.
Select
Auto Regi Adjust
, then press
OK
.
5.
Select
On
, then press
OK
.
6.
To return to the Ready screen, press
Return
.
Performing an Automatic Color Registration Adjustment
Automatic color registration adjustment occurs every time a new toner cartridge is installed. You can run
this adjustment at other times as needed.
To perform an automatic color registration adjustment:
1.
On the printer control panel, press the
System
button.
2.
To select
Admin Menu
, press the arrow buttons, then press
OK
.
3.
Select
Maintenance
, then press
OK
.
4.
Select
Adjust Color Regi
, then press
OK
.
5.
At
Auto Adjust
, press
OK
.
6.
At the
Are you sure?
prompt, press the arrow buttons to select
Yes
.
7.
To begin the calibration, press
OK
.
