Xerox Versant 280 Press, Quick Start Manual

Page: 8 / 44

Power On or Off the Press
PPoow weerr O Onn tthhee PPrreessss
1. Check that the Main Power switch behind the Front Door is On .
2. Press the Power button on top of the press to the ON position.
The Services button glows blue.
A screen message advises of a short wait while the fuser warms up and the press runs a system
check. You can set features for a job during this time and the printing process will start
automatically when the press is ready.
PPoow weerr O Offff tthhee PPrreessss
Important: Always power off the power button first, and then power off the main power
switch.
1. Press the Power On/Off button on the top of the press to Off .
Wait until the lights on UI stop blinking, as this allows the fuser to begin cooling.
2. Switch Off the Main Power switch behind the Front Door.
Note: Allow the press to remain off for a minimum of 10 seconds before switching on the
power again.
8 Xerox ® Versant ® 280 Press
Quick Start Guide
Getting Started