Xerox Versant 280 Press, Quick Start Manual, Page: 24 / 44

b. With the document feeder open, pull the lever that is located at the top of the document
cover.
Part of the document cover pulls away from the assembly, which allows better access to the
second-side scanning lens assembly.
c. To remove dirt, wipe the mirrored glass, metal strip, both sides of the white-plastic strip, and
the rollers with a soft cloth moistened with water, then wipe it dry with a soft cloth.
Caution: Do not press heavily on the mirrored glass as this will result in damage to the
film around the glass surface.
Note: If dirt is difficult to remove, try gently wiping with a soft cloth moistened with a
small amount of neutral detergent.
4. Once the second-side scanning assembly is clean, return the document cover to its original
position and ensure that the lever is locked in place.
If you touch the document cover with your bare hands, wipe it clean before closing the document
feeder.
5. Gently close the document feeder.
24 Xerox ® Versant ® 280 Press
Quick Start Guide
Maintenance