Xerox Versant 280 Press, Quick Start Manual

Page: 9 / 44

Power Saver
The Power Saver feature allows the press to enter a reduced power consumption mode when all print
jobs have completed and there are no jobs currently processing. There are two power saving modes:
Low Power and Sleep.
By default, the press automatically enters the Low Power mode after 1 minute of inactivity. After 1
minute of inactivity, the press then enters Sleep mode. These time intervals for both modes can be
changed by the system administrator.
Refer to the following example:
• Low Power Mode is set to 1 minute.
• Sleep Mode is set to 10 minutes.
• Sleep Mode activates after 10 minutes of total inactivity and not 10 minutes after the Low Power
Mode begins.
LLoow w PPoow weerr M Mooddee
In this mode, the power to the User Interface (UI) and fuser unit is lowered to save power. The
display goes out and the
Power Saver
button on the UI lights. To use the press, press the Power
Saver button. The
Power Saver
button is no longer lit, indicating that the Power Saver feature is
canceled.
SSlleeeepp M Mooddee
In this mode, the power is lowered more than in the Low Power mode. The display goes out and the
Power Saver button on the UI lights. To use the press, press the Power Saver button. The Power Saver
button is no longer lit, indicating that the Power Saver feature is canceled.
EExxiittiinngg PPoow weerr SSaavveerr
The press exits Power Saver mode by doing one of the following:
• Pressing the Power Saver button on the press UI
• Receiving print data for an incoming job to be printed
• Programming and performing a copy or scan job
Xerox ® Versant ® 280 Press
Quick Start Guide
9
Getting Started