Xerox VersaLink B71 Series User Documentation Download

Page: 201 / 234

Probable Causes

Solutions

Something is wrong with the outlet connected to the
printer.

• Plug another electrical appliance into the outlet

and check if it operates properly.

• Try a different outlet.

The printer is connected to an outlet with a voltage
or frequency that does not match the printer
specifications.

Use a power source with the specifications listed in
the

Electrical Specifications

Caution:

Plug the three-wire cord with grounding prong directly into a grounded AC outlet.

PPrriinntteerr RReesseettss oorr PPoow

weerrss O

Offff FFrreeqquueennttllyy

Probable Causes

Solutions

The power cord is not plugged into the outlet
correctly.

Power off the printer, confirm that the power cord is
plugged in correctly to the printer and the outlet,
then power on the printer.

The power cord is not secured in place correctly.

Use the bracket provided with the printer to secure
the power cord in place.

A system error occurred.

Power off the printer, then power on again. Print the
Error History Report. For details, refer to

Printing the

Error History Report

. If the error persists, contact your

Xerox representative.

The printer is connected to an uninterruptible power
supply.

Power off the printer, then connect the power cord to
a suitable outlet.

The printer is connected to a power strip shared with
other high-power devices.

Plug the printer directly into the outlet or into a
power strip that is not shared with other devices.

PPrriinntteerr D

Dooeess N

Noott PPrriinntt

Probable Causes

Solutions

The printer is in Power Saver mode.

On the control panel, press the

Power/Wake

button.

The printer has an error.

If the Status LED is blinking amber, follow the
instructions on the control panel to clear the error. If
the error persists, contact your Xerox representative.

The printer is out of paper.

Load paper into the tray.

A toner cartridge is empty.

Replace the empty toner cartridge.

The drum cartridge has reached end of life.

Note:

In some cases, it is possible for the printer to

continue printing temporarily with the Drum
Cartridge Past End of Life message displayed.

Replace the drum cartridge.

The toner waste container is full.

Replace the toner waste container.

201

Summary of Contents for VersaLink B71 Series











































































































































































































































Search results

Summary of Contents for VersaLink B71 Series

Reviews:

Related manuals for VersaLink B71 Series

Brands by name

Popular brands

Xerox VersaLink B71 Series, User Documentation

Search results

Summary of Contents for VersaLink B71 Series

Reviews:

Related manuals for VersaLink B71 Series

Brands by name

Popular brands