Xerox VersaLink B71 Series User Documentation Download

Page: 200 / 234

• Disconnect the power cord and other cables from the back of the printer.

WARNING:

To prevent electric shock, never touch the power plug with wet hands. When

removing the power cord, ensure that you pull the plug and not the cord. Pulling the cord can

damage it, which can lead to fire or electric shock.

Note:

• When moving the printer, do not tilt it more than 10 degrees in any direction. Tilting the

printer more than 10 degrees can cause toner spillage.

• When moving the printer over a long distance, remove the drum cartridge and toner

cartridge to prevent toner from spilling.

Caution:

Do not expose the drum cartridge to direct sunlight or strong indoor fluorescent

lighting. Do not touch or scratch the surface of the drum.

Caution:

Failure to repackage the printer properly for shipment can result in damage not

covered by the Xerox

Warranty, Service Agreement, or Total Satisfaction Guarantee. The

Xerox

Warranty, Service Agreement, or Total Satisfaction Guarantee do not cover damage to

the printer caused by improper moving.

After moving the printer:

1. Reinstall any parts that you removed.

2. Reconnect the printer to the cables and power cord.

3. Plug in and power on the printer.

Troubleshooting

Geenneerraall TTrroouubblleesshhoooottiinngg

This section contains procedures to help you locate and resolve problems. Resolve some problems by
simply restarting the printer.

PPrriinntteerr D

Dooeess N

Noott PPoow

weerr O

Onn

Probable Causes

Solutions

The power switch is not switched on.

• Open the front door, then and check that the

power switch is in the On position.

• At the printer control panel, press the

Power/

Wake

button. For details, refer to

Powering On the

Printer

The power cord is not plugged into the outlet
correctly.

Power off the printer, then plug the power cord into
the outlet securely. Use the bracket provided with the
printer to secure the power cord in place.

The power cord is not secured in place correctly.

Use the bracket provided with the printer to secure
the power cord in place.

200

Summary of Contents for VersaLink B71 Series











































































































































































































































Search results

Summary of Contents for VersaLink B71 Series

Reviews:

Related manuals for VersaLink B71 Series

Brands by name

Popular brands

Xerox VersaLink B71 Series, User Documentation

Search results

Summary of Contents for VersaLink B71 Series

Reviews:

Related manuals for VersaLink B71 Series

Brands by name

Popular brands