Xerox TF4025.4075, User Manual

Page: 27 / 96

Initial Operation · Connecting the Mains Cable¦ 27
EN
Connecting the Mains Cable
Mains Voltage at the Site of Installation
Connecting the Mains Cable
Insert the mains cable into the connection located on the rear side of the device. Plug the
power cable into the electrical outlet.
Netzkabel anschließen
Initial Installation
Starting Initial Installation
After you connect your device to the mains voltage, the initial installation commences. Press
î
. Your device prints a help page.
Selecting the Language
1. Use
[
to select the desired display language.
2. Confirm with
OK
.
Selecting the Country
Setting the Country Correctly
Setting the Country
1. Use
[
to select the country in which you are operating the device.
2. Confirm with
OK
.
After this input, the device prints another help page and checks the telephone line.
CAUTION!
Mains Voltage at the Site of Installation!
Check whether the mains voltage of your device (indicated on the type label)
matches the mains voltage available at the setup location.
CAUTION!
Setting the Country Correctly!
You must set the country in which you are operating the device. Otherwise your de-
vice is not adapted to the telephone network. If your country is not included in the
list, you must select a different setting and use the correct telephone cable for the
country. Consult your retailer.