XES Synergix 8855
Controller Setup Manual for Firmware 7.0
14
Preparing the Parallel Port
Parallel Port
This port requires connecting a parallel cable between your workstation
parallel port and the controller parallel port. An appropriate software print
driver or system command is necessary to direct jobs to the printer.
Software Supported:
PC/WINDOWS 95 AND WINDOWS 98 PLATFORMS:
•
HP RTL Print Driver
•
ADI Drivers for AutoCAD R13/14
•
HDI Drivers for AutoCAD 2000 and 2000i
•
PostScript PPD System Print Driver
•
Document Submission Tool (part of AccXES Client Tools)
PC/WINDOWS NT 4.0 AND WINDOWS 2000 PLATFORMS:
•
HP RTL/HP-GL/2 Print Driver
•
ADI Drivers for AutoCAD R13/14
•
HDI Drivers for AutoCAD 2000 and 2000i
•
PostScript PPD System Print Driver (NT 4.0 only)
•
Document Submission Tool (part of AccXES Client Tools)
DATA FORMATS SUPPORTED
•
HP-GL,
HP-GL/2
•
HP-RTL
•
TIFF,
NIRS
•
CALS 1 & 2
•
CalComp 906/907/951 PCI with Electrostatic extensions
•
CGM
•
VCGL
•
VDS
•
C4
•
Filenet
•
PostScript 3 with PDF(option)
Parallel Cable Description
The cable connector is a standard, “mini-Centronics” P1284C connector.
A ten foot, high density P1284A to P1284C cable is available (Xerox part
number 98S03302).
The maximum length of the parallel cable must not exceed 12 feet (3.66 m).