8825/8830 DDS User Guide/7
Getting to know the 8825/8830 DDS
The Scanner
DDS User Interface (continued)
Option keys and Feature keys
Output Format
−
Manual
The Output Format button selects the size to which the roll feed media will
be cut.
Manual allows the operator to enter the desired length and width manually.
To select the Manual mode, press the key under Output Format until the
Manual indicator illuminates. The CUSTOM OUTPUT FORMAT screen is
displayed.
Press the Next key to select WIDTH or LENGTH. Press the Enter key to
confirm the choice.
Enter a value, using the Numeric Keypad.
Note: the entered value must be within the limits shown in parentheses on
the screen.
Press the Enter key to confirm the value.
When the values for WIDTH and LENGTH are correct, press the Exit key to
leave the screen.
Film
Bond
Auto
R2
R3
Preset
Media Selection
Source
Type
Output Format
Sheet
Synchro
Manual
R1
Vellum/
Tracing
CUSTOM OUTPUT FORMAT
ENTER CUSTOM MEDIA SIZE
WIDTH
(11.0 - 36.0): 11.0 IN
LENGTH
(8.3 - 1200): 8.5 IN
