Xerox Phaser 860 User Manual Download Page 94

Page: 94 / 108

Phaser 860 Color Printer

Spec

ificatio

SECTION 16 - OTHER INFORMATION

Original preparation date:10/3/00

Xerox Corporation

Office Printing Business

Environmental, Health & Safety

P.O. Box 1000

Mail Stop 60-512

Wilsonville, Oregon 97070

Safety Information: 800-828-6571

Health Information: 716-422-2177

Material Safety Data Sheet for CleanTex

Alcopad

SECTION 1 – PRODUCT IDENTIFICATION

Trade name:

Xerox Part Number:

Alcopad

016-1845-00

Product identification numbers: 806B, 806C, 806H, 806T, 806Z, 806

Chemical name and synonyms: Isopropyl Alcohol

Chemical formula: CH

CH(OH)CH

Emergency telephone numbers: CHEMTREC (Transportation): 1-800-424-9300

Product Use: Xerox Phaser

860 Color Printer

SECTION 2 – INFORMATION ON INGREDIENTS

Component CAS# % OSHA PEL (ppm) ACGIL TLV (ppm)

Isopropyl alcohol 67-63-0 91.0 400 400

Deionized water 7732-18-5 9.0 NA NA

SECTION 3 – HAZARDS IDENTIFICATION

Product is distributed as a single-use, presaturated pad, in which all the liquid

is absorbed by the applicator. Isopropyl alcohol is a flammable liquid. Eye

contact will cause local irritation and burning sensations with possible injury

if not removed promptly. Repeated or prolonged contact with skin may

produce irritation and cause dermatitis. Exposure above TLV may cause

irritation of respiratory tract and eyes along with headaches, dizziness and

CNS effects. May be harmful if swallowed.
Carcinogenicity (OSHA/NTP/IARC/ACGIH): Not Listed.

Medical Conditions Aggravated by Exposure: Not Listed.

SECTION 4 – FIRST AID MEASURES

EYE CONTACT: Flush with water for 15 minutes, including under eyelids.

Get Medical help.

SKIN CONTACT: Flush with water.

INHALATION: Remove to fresh air. Keep at rest. Restore and/or support

breathing as needed. Get prompt Medical attention.

INGESTION: In the unlikely event of ingestion of a wiper, first aid measures

should focus on removal of the object and preventing choking. Once

removed, keep affected person at rest. Call physician immediately.

Summary of Contents for Phaser 860













































































































Search results

Summary of Contents for Phaser 860

Reviews:

Related manuals for Phaser 860

Brands by name

Popular brands

Xerox Phaser 860, User Manual

Search results

Summary of Contents for Phaser 860

Reviews:

Related manuals for Phaser 860

Brands by name

Popular brands