Xerox Phaser 860 User Manual Download Page 32

Page: 32 / 108

Phaser 860 Color Printer

g T

rays

Observe the fill lines on the left side of the tray. Don't load paper
above the

Paper

fill line. Don't load transparencies or labels above

the

Transparency/Label

fill line.

If you loaded paper, make sure that the tray switch on the
front-right side of the tray is set to

Paper

(forward position). If you

loaded transparencies, make sure that the tray switch is set to

Transparency

(back position).

Slide the tray back into the printer.

Note

Do not place paper that was printed on one side back into the
printer to print on the second side. Pre-printed pages may
stick together.

Paper Transparency

0726-02

Paper

Transparency /

Label

0726-03

Paper

Transparency /

Label

0726-04

Tra

nsp

are

ncy

Lab

Tra

nsp

are

ncy

Pap

0726-05

Tran

spa

renc

Lab

Tran

spa

renc

Pap

0726-06

Summary of Contents for Phaser 860













































































































Search results

Summary of Contents for Phaser 860

Reviews:

Related manuals for Phaser 860

Brands by name

Popular brands

Xerox Phaser 860, User Manual

Search results

Summary of Contents for Phaser 860

Reviews:

Related manuals for Phaser 860

Brands by name

Popular brands