Xerox Phaser 860 User Manual Download Page 89

Page: 89 / 108

User Guide

Spec

ific

ation

Specifications

Material Safety Data Sheet for ColorStix

II Ink

SECTION 1- PRODUCT IDENTIFICATION
Trade Names

Xerox Part No.

ColorStix

II Ink, Black

016-1902-00, 016-1902-50

ColorStix

II Ink, Cyan

016-1903-00, 016-1906-00

ColorStix

II Ink, Magenta

016-1904-00, 016-1907-00

ColorStix

II Ink, Yellow

016-1905-00, 016-1908-00

Four color "rainbow" pack

016-1909-00

Supplies Start-up Kit

860 SS 00, 860 SS 01

Product Use: XEROX Phaser

860 color printers

SECTION 2 - INFORMATION ON INGREDIENTS

Xerox Phaser

860 ColorStix

II are a proprietary blend of polyethylene and

fatty amide waxes, resins, and dyes. The specific identity of ingredients is

withheld as a trade secret.
ColorStix

II solid inks are considered articles under Hazard Communication

regulations. This Material Safety Data Sheet is provided as a customer service.

SECTION 3 - HAZARDS IDENTIFICATION

ROUTES OF EXPOSURE: Skin

POTENTIAL HEALTH EFFECTS

Immediate Effects: None are known, when used as intended in Phaser

860

Color Printers. See Section 11 for toxicology test information.

Chronic Effects: None are known

SIGNS AND SYMPTOMS OF EXPOSURE: None are known.

MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE: None are known.

SECTION 4 - FIRST AID MEASURES

EYES: Contact unlikely. If particles get into eyes, flush thoroughly with water.

INGESTION: Not applicable

INHALATION: Not applicable

SKIN: Wash skin thoroughly with soap and water

SECTION 5 - FIRE FIGHTING MEASURES

FLASH POINT: > 221 degrees C (>429 degrees F), Pensky-Martens closed

tester

FIRE & EXPLOSION HAZARDS: These inks will burn. During a fire, irritating

and toxic gases may be generated by thermal decomposition or combustion.

EXTINGUISHING MEDIA: All extinguishing agents classified as B and C are

effective, including dry powder(s), carbon dioxide, and halon.

Summary of Contents for Phaser 860













































































































Search results

Summary of Contents for Phaser 860

Reviews:

Related manuals for Phaser 860

Brands by name

Popular brands

Xerox Phaser 860, User Manual

Search results

Summary of Contents for Phaser 860

Reviews:

Related manuals for Phaser 860

Brands by name

Popular brands