Xerox Phaser 7300B, Service Manual

Page: 198 / 277

6-182 Phaser 7300 Color Printer Service Manual
Fuser Exit Roller (PL 5.1.1)
1.
Remove the Front Cover (see pg. 6-136).
2.
Remove the Rear Shield Plate (see pg. 6-146).
3.
Remove the Rear Power Supply Fan and Duct (see pg. 6-162).
4.
Remove the Front Chassis Fan (see pg. 6-155).
5.
Remove the Electrical Card Cage (see pg. 6-147).
6.
Lift and remove the Duplex Guide Assembly (see pg. 6-179).
7.
At the rear of the Fuser Exit Roller (item #2), remove 1 G screw securing the
ground contact (item #3).
8. Remove the bearing, 1 B screw, and the fuser drive gear.
9. At the front of the Fuser Exit Roller, release the two locking tabs and remove the
bearing (item #1) from the front end of the shaft.
10.
Slide the Fuser Exit Roller to the rear of the printer until the front end of the shaft
is free, and remove the shaft.
B
G
3
2
1
S7300-167