Xerox Phaser 7300B, Service Manual

Page: 169 / 277

FRU Disassembly 6-153
Toner Cartridge Sensor Actuators (PL 4.18)
1.
Remove the Toner Sensor Board (item #3) and LED Harnesses (item #2)
(see pg. 6-152).
2. Rotate the board up to expose the component side of the board.
3. From the underside of the Top Cover Inner Frame, use a small screwdriver to
carefully push up the arms of the actuator until they pop free.
4.
Remove the Toner Cartridge Sensor Actuator (item #1).
Caution: Ensure the ribbon cables are properly routed and dressed.
Do not crunch or fold the ribbon cables while reinstalling
the toner sensor board.
S7300-86
1
2
3