manualshive.com logo in svg

Xerox Phaser 6250DT, Service Manual, Page: 368 / 467

Share
Download
Xerox Phaser 6250DT Service Manual Download Page 368

Parts List

9-3

Using the Parts List

1. No.: 

The callout number from the exploded part diagram. 

2. Part Number:

 The material part number used to order specific parts.

Note

An asterisk following the part number identifies parts that are unique to the 
Phaser 6250 Color Laser Printer. All other part are common with the Phaser 
6200 Color Laser Printer.

3. Qty:

 This number represents the parts per printer, not the number of parts 

supplied in the actual part order. 

4. Name/Description: 

Details the name of the part to be ordered and the number 

of parts supplied per order.

5.

Parts identified throughout this manual are referenced PL#.#.#; For example, 
PL3.1.10 means the part is item 10 of Parts List 3.1.

6.

A black triangle preceding a number followed by a parenthetical statement in an 
illustrated parts list means the item is a parent assembly, made up of the 
individual parts called out in parentheses.  

7.

The notation “with X~Y” following a part name indicates an assembly that is 
made up of components X through Y. For example, “1 (with 2~4)” means part 1 
consists of part 2, part 3, and part 4.

8.

Two asterisks (**) following a part name indicates the page contains a note about 
this part.

9.

The notation (NS) next to a part indicates that pariticular part is not spared, but 
contained in a kit or major assembly.

10.

The notation “J1<>J2 and P2” is attached to a wire harness.  It indicates that 
connector Jack 1 is attached to one end of the wire harness and connector J2 is 
attached to the other end that is plugged into P2.

Note

Only parts showing part numbers are available for support.   Parts not showing 
part numbers are available on the parent assembly. 

Legend:

Identifier

Meaning

C

C-ring

E

E-ring

KL K-clip

S

Screw

Summary of Contents for Phaser 6250DT




















































































































































































































































































































































































































































































Reviews:

No comments