manualshive.com logo in svg

Xerox Phaser 6250DT, Service Manual, Page: 201 / 467

Share
Download
Xerox Phaser 6250DT Service Manual Download Page 201

5-20

Phaser 6250 Color Laser Printer Service Manual

Background Contamination

There is toner contamination on all or most 
of the page. The contamination appears as a 
very light gray dusting. The printer displays 
no error code. Before using this procedure, 
Ensure the TekColor correction is not set to 
“None” in the printer’s dialog box. Ensure 
the customer is making less than 2,000 
prints per day. Making more than 2,000 
prints a day exceeds the duty cycle 
specifications for the printer.

Note

Depending on the type of paper and environmental conditions, some light 
amount of random background spotting (backgrounding) is normal. The 
whiter and glossier the paper, the more noticeable it will be.

Troubleshooting Procedure

Step

Check

Yes

No

1

Check the Imaging Unit, Fuser 

Assembly and the Transfer Roller for 

correct installation, damage or 

contamination.

Replace or reinstall 

the affected 

component.

Go to Step 2.

2

Inspect the surface of the Transfer 

Roller for wast toner. The roller 

should appear black and shiny. Is the 

roller contaminated with waste 

toner?

Replace the 

Transfer Roller, 

page 8-4

Go to Step 4.

3

Does the image quality improve if the 

Transfer Roller is replaced?

Complete

Go to Step 4.

4

Replace the Imaging Unit, PL 9.1.3. 

Does the image quality improve if the 

Imaging Unit is replaced?

Complete

Go to Step 5.

5

Replace the Fuser Assembly, 

PL 8.1.1. Does image quality 

improve if the Fuser is replaced?

Complete

Go to Step 6.

6

Check the following pins to the 

transfer roller contacts for continuity:

J5030 <=> Transfer Roller

J5020 <=> Transfer Roller

Go to Step 7.

Replace the defective 

harness.

S6200-285

Summary of Contents for Phaser 6250DT




















































































































































































































































































































































































































































































Reviews:

No comments