manualshive.com logo in svg

Xerox Phaser 6250DT, Service Manual, Page: 212 / 467

Share
Download
Xerox Phaser 6250DT Service Manual Download Page 212

Adjustments and Calibrations

6-5

Restore Factory Settings (Margins)

You can reset margin settings to the factory-default values.

Caution

Use caution when resetting your margins to the factory-default settings. 
Changing these settings back to factory defaults may not be the last-saved 
settings if you have previously calibrated your margins.

1.

From the Main Menu, highlight Troubleshooting and press OK.

2.

Highlight Print Quality Problems and press OK.

3.

Highlight Calibrate Margins Menu and press OK.

4.

Highlight Restore Factory Settings and press OK to reset the margin settings.

Resetting Connection Setup Defaults

Resetting the Connection Setup values sets TCP/IP address, TCP/IP address menu 
settings (gateway, broadcast, etc.), CentreWare IS, EtherTalk, Netware, set IPX frame 
type, IPP, Ethernet speed, Wait Timeout, Page Description Language, and Port 
selection for both Parallel and USB Ports to their default values.

Caution

Make note of the current network settings or print a configuration page to provide 
a record of the customer’s current network settings before resetting the 
connection setup to the factory default values. 

1.

From the Main Menu, highlight Printer Setup and press OK.

2.

Highlight Connection Setup and press OK.

3.

Highlight Reset Connection Setup and press OK to reset connection defaults.

Resetting Paper Handling Defaults

Resetting the Paper Handling defaults resets the paper source, 2-sided printing, tray 
setup, load paper timeout, tray sequence, custom units and jam recovery settings to 
their default values.

1.

From the Main Menu, highlight Printer Setup and press OK.

2.

Highlight Paper Handling Setup and press OK.

3.

Highlight Reset Paper Handling Setup and press OK.

4.

Highlight Reset Paper Handling Setup NOW and press OK to reset the paper 
handling defaults.

Summary of Contents for Phaser 6250DT




















































































































































































































































































































































































































































































Reviews:

No comments