Xerox Phaser 6128 MFP Service Manual Download Page 478

Page: 478 / 606

8-54

Phaser 6128MFP Service Manual

Service Parts Disassembly

HVPS

PL10.7.1

1. Remove the Upper Frame Assembly (page 8-68).

2. Open the Edging Saddle and release the HVPS harness.

3. Remove 7 screws (silver, with flange, 6mm) that secure the HVPS to remove

the HVPS.

Power Switch Harness

PL10.7.8

1. Open the Front Cover.

2. Remove the Left Side Cover (page 8-17).

3. Remove the Outer Pole Cover (page 8-19).

4. Remove the Rear Cover (page 8-22).

5. Remove the Right Side Cover (page 8-23).

6. Remove the Top Cover (page 8-25).

7. Remove the LVPS Card Cage (page 8-66).

8. Release the clamp that secures the Power Switch Harness.

s6128mfp-257

Summary of Contents for Phaser 6128 MFP






























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Phaser 6128 MFP

Reviews:

Brands by name

Popular brands

Xerox Phaser 6128 MFP, Service Manual

Search results

Summary of Contents for Phaser 6128 MFP

Reviews:

Brands by name

Popular brands