Xerox Phaser 6128 MFP, Service Manual

Page: 32 / 606

1-8 Phaser 6128MFP Service Manual
General Information
1. Function Select
buttons
Press to use the Copy, Fax, Email, and Scan
menus on the display screen.
2. Display Indicates messages, menus, and toner levels.
3. Arrow buttons Scroll through the menus. The Back Arrow
button also displays the Walk-Up Features
menu.
4. Job Status button Press to check active job status.
5. System button Switches the display to the Setup menu. The
green light indicates that the printer is ready. If
the light is blinking, the printer is receiving data.
6. Alphanumeric key pad Use to enter letters and numbers for names and
phone numbers.
7. Clear All button Clears all text or numbers or instructions.
8. Power Saver button This light is on in power saver mode. Push the
button to exit power saver mode.
9. Stop button Cancels the current print job.
10. Start button Press to start a copy, scan, or fax job.
11. Error LED The red light indicates an error condition.
12. Speed Dial button Press to access directories of group or individual
fax telephone numbers.
13. Clear button Deletes a single character each time the button
is pressed. For use when entering email
addresses and telephone numbers.
14. Redial/Pause button Press the button to recall the last fax number
used or to insert pauses in fax numbers.
15. Manual Dial button When faxing, press this button to enter a fax
number with the alphanumeric key pad.
16. Address Book button Press to access the Fax and Email address books.
17. OK button Press to accept the setting selected.
18. Exit button Press to go up one level in the menu.
19. Arrow LEDs These LEDs indicate the flow of data either into
or out of the printer.
20. Job in Memory LED When illuminated, it indicates that there is a job
in the printer’s memory.
21. Color Mode button Press to switch between Color and Black and
White modes for your copy, fax, and scan job.
22. One touch keypad Use to dial stored speed-dial numbers.