![Xerox Phaser 5500 series User Manual Download Page 140](http://html2.mh-extra.com/html/xerox/phaser-5500-series/phaser-5500-series_user-manual_3479091140.webp)
Windows 98 and Windows Me
Phaser® 5500 Laser Printer
3-28
Verifying Settings
1.
Right-click
Network Neighborhood
on the desktop, then click
Properties
.
2.
Click the
Configuration
tab. A list of installed network components appears for the
following items:
■
Client for Microsoft networks
■
Xerox TCP/IP Port Monitor
3.
If you are running CentreWare DP verify the following:
■
Novell Networks: You are required to load Novell IntraNetWare Client or Microsoft
Client for IPX networks.
■
TCP/IP Networks: No additional software is required, but your printer must have a
valid TCP/IP address assigned.
4.
If any of the above protocols or services are not installed, install the necessary components
and restart the system. When the system is restarted, return to this document.
5.
Click
Start
, click
Settings
, then click
Printers
. The
Printers
window appears.
6.
Right-click the printer icon, then click
Properties
.
7.
Select the
Details
tab.
8.
Verify the following:
a.
The printer driver name in the
Print Using the Following Driver
list. If necessary, re-
select or install a new printer driver.
b.
The
Port
name in the
Print to the Following Port
list. If necessary, re-select the
correct name.
9.
Send a print job to the printer. If the printer does not print, access
PhaserSMART
Technical Support from the
Troubleshooting
tab of the Windows printer driver or go to
www.xerox.com/office/support
.
infoSMART Knowledge Base Documents (English only)
For more information, go to
www.xerox.com/office/5500infoSMART
to view these
documents.
Reference Name
Title
R100207118
Installing a Windows 98/Me printer driver