Windows 98 and Windows Me
Phaser® 5500 Laser Printer
3-25
Quick CD-ROM Install Steps
1.
Insert the
Printer Installer and Utilities CD-ROM
into the computer’s CD-ROM drive. If
the installer does not launch, do the following:
a.
Click
Start
, then click
Run
.
b.
In the Run window, type:
<CD drive>:\INSTALL.EXE
.
2.
Select your desired language from the list.
3.
Select
Install
Printer Driver
.
4.
Click
I Agree
to accept the Xerox Software License Agreement.
5.
In the Select Printer dialog box, the default
Use
Walk-Up Technology (recommended
for network printers)
is selected. Click
Next
.
6.
Follow the
Use Walk-Up Technology
instructions displayed.
7.
Click
Exit Program
.
Note
If the Walk-Up Technology dialog box remains onscreen after you have completed
Steps 1–6, click the
Back
button, then click
Select from the following discovered
printers
. Follow the onscreen prompts to complete the installation procedure.
For more information, go to the table of
infoSMART Knowledge Base documents
at the end of
this section.
Other Methods of Installation
Install your printer on a Windows 98 or Windows Me network using one of these methods:
■
Xerox TCP/IP Port Monitor
■
PhaserPort Software
Xerox TCP/IP Port Monitor
The Windows installer installs the Xerox TCP/IP Port Monitor. The Xerox TCP/IP Port
Monitor can be used to add or remove TCP/IP ports.
Adding a Port
1.
Open
Printer Properties
for the printer you would like to attach to the new TCP/IP port.
2.
Click
Start
, click
Settings
, then click
Printers
.
3.
Right-click the printer to be attached to the new TCP/IP port, then click
Properties
.
4.
Click the
Details
tab, then click the
Add Port
button.
5.
Select
Other
.
6.
From the list of available printer-port monitors, select the
Xerox TCP/IP Port
, then click
OK
.
