manualshive.com logo in svg

Xerox PHASER 3116, User Manual

Share
Download
Xerox PHASER 3116 User Manual Download Page 52

U

SING

 P

RINT

 M

ATERIALS

3.

13

3

1

Open the rear output tray. Load transparencies in the 
manual feeder 

with print side up

, and the 

top with the 

adhesive strip going first

. 

2

Adjust the guide to fit the width of the transparencies.

3

When you print on transparencies, you must select 

Manual 

Feed

 for 

Source

 from the software application, and then 

select the correct paper size and type. For details, see 
page 4.6. 

Note: 

Please be careful when you open the rear cover. The inside 

of the printer maybe hot.

4

Press the  

  button to start feeding.

Printing is started. Close the rear output tray after the 
printing is completed. 

Notes:

 

• To prevent transparencies from sticking to each other, do not let 

the printed sheets stack up as they are printed out.

• Place transparencies on a flat surface after removing them from 

the printer.

Summary of Contents for PHASER 3116





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands