Xerox MF Series, Technical Document

Page: 16 / 191

- 14 - TD 252 787 467 - A
• ECP: Parallel Interface to PC
• USB: USB Interface
• LAN: Local Area Network Interface
Pin Signal Input/Output Use
1 HOSTCLK I Data clock (forward)
2 DATAECP0 I/O Data bus LSB
3 DATAECP1 I/O Data bus bit 1
4 DATAECP2 I/O Data bus bit 2
5 DATAECP3 I/O Data bus bit 2
6 DATAECP4 I/O Data bus bit 4
7 DATAECP5 I/O Data bus bit 5
8 DATAECP6 I/O Data bus bit 6
9 DATAECP7 I/O Data bus MSB
10 PRPHCLK O Data clock (reverse)
11 PRPHACK O Data acknowledgment (forward)
12 ACKRVRS O Acknowledgment of reverse request
13 XFLAG O Indicates that ECP mode is
supported
14 HOSTACK I Data acknowledgment (reverse)
32 PRPHREQ O Data drive request
31 RVRSREQ I Data drive enable
36 ECPACTIVE O Mode select
18 ERREUR - Proprietary
16 GND - Ground
17-19 GND - Ground
20 GND - Ground
21 GND - Ground
22 GND - Ground
23 GND - Ground
24 GND - Ground
25 GND - Ground
26-27-28-29-30 GND - Ground
15-33-34-35 - - Not connected
Pin Signal Input/Output Use
1 VBUS_USB I Supply from master
2 USBN I/O Differential pair
3 USBP I/O Differential pair
4 GND I/O Ground
Pin Signal Input/Output Use
1 TXP O Network transmission differential
pair
2 TXN O Network transmission differential
pair
3 RXP I Network reception differential pair
4 NC - Not connected
5 NC - Not connected
6 RXN I Network reception differential pair
7 NC - Not connected
8 NC - Not connected